Rika Sensor es un fabricante de sensores meteorológicos y proveedor de soluciones de monitoreo ambiental con más de 10 años de experiencia en la industria.
The create of Rika Sensors solar cell goes through a fine analysis of manufacture requirements. The procedure consists of designing model sketch or prototype, deciding the reasonable number of operations, choosing work methods and selecting adequate equipment. It guarantees ice-free operation in extremely low temperatures and freezing conditions
RK95-03 Solar power supply system consists of solar panel, solar controller, battery and the inverter (optional). Solar energy is a clean renewable new energy, has no moving parts, no noise, no pollution, high reliability. It can provide reliable power to sensors or weather stations, mainly used for wireless sensor, automatic test station, automatic weather stations and other power supply.
Controller cannot be directly connected to the AC110V/AC220V,the AC must be converted to DC(12V/24V),then connect to the controller.
Typical applications:
Application scope
Single wireless(WIFI,GPRS,Lora, etc.) sensor
RK160-02,RK200-05 or RK400-03
RK900-01
Solar panel
5Wp@18V
10Wp@18V
30Wp@18V
240*230*17mm
295*295*20mm
520*420*25mm
Controller
10A@12V/24V
10A@12V/24V
10A@12V/24V
81*62*20mm
81*62*20mm
81*62*20mm
Lead-acid battery
7AH@12V
12AH@12V
20AH@12V
151*65*94mm
151*98*95mm
181*76*165mm
Protection box
Customized
Customized
Customized
Cable
RVV2*0.5
RVV2*0.75
RVV2*0.75
Note:
1. Suggest user to ready battery, because the battery is not convenient to transport;
2. The size of the protective box according to the project need to customize;
3. Cable length can be customized.
CONTROLLER DIMENSION & CONNECTION & WORK MODE
The controller has 4 work modes:
1. Light & time control: Mode=1-15: When there is no sunlight start the load, time control shutoff(1-15 hours);
2. Light control Mode=16: When there is no sunlight start the load,when the light appear, shut down load;
3. Normally open Mode=17: Keep the output state 24 hours a day;
4. Manual mode Mode=18:Manual mode.
5. Press the button for 5 s, digital tube start flashing, product into regulating mode, loosen the button, each time you press the button, the number will increase, and the set up, about 5 s digital tube stop flashing, exit mode Settings.
CUSTOMER TESTIMONIALS
b******v
Rika Sensors solar cell has passed electrical safety testing and gained accreditations from different countries. This includes the EU mark, CE mark, CCC mark, and BEAB Approved Mark.
y******i
The development of Rika Sensors solar cell has taken different factors into consideration. It is developed considering appropriate power, load current capability, supply voltage, harmonic, or other key factors that affect power source utilization. With low power property, this product is eco-friendly
e******w
Rika Sensors solar cell is manufactured adopting the latest energy-conserving technologies. It has been certified under China CECP, a domestic energy keeping certification which aims to verify its energy efficiency level. This product has a high level of IP65
s******s
Rika Sensors solar cell will be inspected and tested thoroughly. It has passed the required tests in terms of the main motor, thermal relay, alternating current contactor, fuse protector, thermoelement, and other essential parts. This product can be individually mounted or directly to a pipe
o******c
During the development of Rika Sensors solar cell, sophisticated electric knowledge is involved. Its basic electric structure, design and arrangement of the circuit board, electric performance, and materials are all needed to be considered seriously. Its high-strength structural design makes it exceptionally durable
a******e
To rule out every possibility of defect, the product is subject to the thorough inspection conducted by professional quality inspectors. This product requires low maintenance during its lifespan